How to Remove Write Protection From USB?

If you want to have your images, media, or work files ready to go, USB memory sticks and similar transferable data storage devices are pretty much useful. These storage devices have been the most popular way of storing digital data for quite some time. However, it is possible that write security would prevent you from transferring your files to a USB drive. When you use a USB flash drive and get the “the disk is write-protected” error, it means your system administrator has set limits, the registry entry is broken, or the drive itself is damaged. It’s also possible that the flash drive is actually write-protected. To know how to remove the write protection from the USB then read furthermore.

How to Remove Write Protection Via A Dedicated Switch?

If your drive has a physical write-protection switch, flip it once to confirm that write-protection has been disabled. Take the USB stick you tried to write to and look for the lock or write protection switch, which is normally located on the side and maybe labeled as such. Replace it in the opposite spot, then attempt to pass data to the memory stick again. If that solves the problem, all you have to do now is make sure the switch doesn’t get mistakenly pushed in the wrong direction again. If there isn’t a turn, or if you still can’t write to the USB, you’ll have to resort to other options. If the USB does not have one then do the other methods that are mentioned below.

How to Remove Write Protection Via The Registry?

To do the following method, you must open the Registry Editor,

  • By pressing the Windows key on the keyboard Go to the Start Menu.

  •  Select the Registry Editor app that appears in the search results.

  • Locate: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlStorageDevicePolicies.

  • If StorageDevicePolicies isn’t listed under Control, right-click Control, select New, and then type StorageDevicePolicies.

  • Right-click on StorageDevicePolicies and select Properties. For a 32-bit architecture scheme, open the New->DWORD (32-bit) value, but if your PC is 64-bit, simply pick QWORD (64-bit) value and label it with WriteProtect.

  • In the right row, double-click WriteProtect.

  • In the dialogue, type 0 for Value Data Size.

Remove USB Write Protection using Windows BitLocker

Since Windows 7, BitLocker has been built into the operating system to encrypt your files. Since the program is designed for internal drives, it can also encrypt USB sticks and drives. Bitlocker isn’t allowed by default, but it’s possible that you did it before and forgot about it, or that someone else did it for you. Look for the storage device you’re looking for in File Explorer. BitLocker has been activated for the user if the icon has a padlock. Go to Manage BitLocker by right-clicking on the icon. This move opens the BitLocker Drive Encryption window, which displays a list of all storage units and their encryption status. To switch off BitLocker, simply right-click the secure USB drive and pick “Turn Off BitLocker.” The computer is being decrypted, and BitLocker will be turned off until it is done. After you’ve disabled BitLocker, try copying something to the USB stick to see if the issue has been resolved.

How to Remove Write Protection using Diskpart?

Diskpart is a command-line tool that allows you to handle all storage units that the device detects. To know how to remove the write protection then, do the following Steps,

  • Test the USB device’s storage capacity and keep it in mind. This advice would be useful in the near future. Plug the USB into the computer port after you’ve checked the room cap.

  • Open the Command Prompt window. You can do this by pressing Windows key+R and typing CMD, or by going to the Start menu and looking for Command Prompt. If the message “Access is refused” appears, right-click Command Prompt and select “Run as Administrator.”

  • Type “Diskpart” into Command Prompt and press Enter. Then type “List Disk” and hit Enter once more.

  • A list of all memory storage Disks, labeled Disk 0, Disk 1, and so on, will appear. When you need to find your USB unit, you’ll need the capacity details.

  • Type “Select Disk,” then the number of the USB disk. For example, if your USB is Disk 1, type “select disk 1” without the quotes, then hit Enter. Type “Attributes Disk clear read-only” and hit Enter. Yes, “read-only” is the correct spelling.

  • Finally, wait for the write Protected to be removed, then type “Exit” and press Enter to exit Command Prompt. After the device has rebooted, restart your PC and try writing on the USB again.

  • How to remove write protection from USB

  • How to remove write protection on USB drive

  • Remove write protection

  • Write protection USB

  • Remove write protection USB

Disclaimer: The above information is for general informational purposes only. All information on the Site is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the Site.